Proper barrel cleaning is an essential part of airsoft gun maintenance. Not only does it maintain accuracy and performance, but it also extends the life of the entire weapon. A dirty barrel can lead to loss of accuracy, problems with bullet feeding and in extreme cases even damage to the gun. This guide will show you how to clean your barrel easily and safely.

Why clean the barrel?

Every time you play, the barrel gets clogged with small dirt, BB residue or grease from the hop-up chamber. These deposits reduce shooting accuracy and performance and can cause BB balls to jam in the barrel. Therefore, regular cleaning is important, especially if you play in dusty environments or challenging conditions such as mud or rain.

When to clean the barrel?

• After any major action or heavy use of the gun.
• If you notice a loss of accuracy or bullet jamming.
• Before storing the gun for an extended period of time.

What do you need?

• A cleaning stick called a "wiper" (usually included in the package).
• Cotton cloth or cotton swabs.
• Isopropyl alcohol or other suitable cleaner (for airsoft guns).
• Paper towels or dry cloth.

How do you do that? Step by step

1) Check that the gun is empty

Remove the magazine and make sure there are no BB pellets left in the chamber or barrel before you start cleaning. Safety always comes first.

2) Prepare the cleaning stick

Wrap the end of the stick with cotton cloth or attach a cotton swab. Make sure the cloth holds firmly, but is not too large so that the barrel can be easily pulled through.

3) Dampen the cloth with detergent

Apply a small amount of isopropyl alcohol or detergent to the fabric. Do not use too much so that the liquid does not get into the hop-up chamber.

4) Stretch the barrel

Gently push the cleaning rod into the barrel from the muzzle towards the hop-up chamber. Stretch it smoothly and rotate it to get the substance to all the dirt inside. Never push forcefully to avoid damaging the barrel or hop-up system.

5) Repeat until the barrel is clean

Replace the cloth with a clean one at each pull. Repeat the process until the cloth is clean when removed from the barrel.

6) Dry the barrel

Finally, use a dry cloth or rag to remove any residual moisture or detergent.

7) Check the barrel

Look through the barrel at the light and verify that it is clean and free of residue.

What about taking out the hop-up rubber?

If you want to do a thorough cleaning of the barrel and remove the hop-up rubber as well, it is possible, but it requires experience. The hop-up rubber is a sensitive component that can be easily damaged by improper handling. If you decide to take this step, you should be able to properly disassemble and reassemble the hop-up chamber. This task is only suitable for experienced players or technicians. If you are unsure, contact a service or professional.

What to watch out for?

• Avoid aggressive cleaning agents that could damage the hop-up rubber.
• Avoid excessive pressure when cleaning to avoid damaging the inner surface of the barrel.
• Do not use too much cleaner to prevent it from getting into the hop-up chamber.

Conclusion

Proper barrel cleaning is an easy way to keep your airsoft gun in great condition. Follow regular maintenance intervals and give barrel cleaning the attention it deserves. A clean barrel ensures more accurate shooting, smoother gun operation, and longer life. If you decide to do more thorough maintenance, including removing the hop-up rubber, make sure you have enough experience or contact a professional.

And as a bonus video, what to do after each airsoft:-)

Powered by Froala Editor